Prima LPR 712 Uživatelský manuál stáhnout pdf (Strana 10)

4. Select the required programme

Turn the programme selector dial to the desired position.

The pilot lights corresponding to the different phases

making up the selected programme light on.

If your laundry needs a soak time, turn the programme

selector dial to “Soak 30°” and then, before starting a

washing cycle, drain the water as described in the “End

of Soak 30 programme ” paragraph.

5. Select the “spin” speed or

“rinse hold”

option

Depress the spin speed button to choose the required

speed or “Rinse Hold” option : the corresponding light

comes on.

6. Select the required options

The light corresponding to the pressed button

illuminates.

Quick

Extra

ERinsePrewash

Easy

Iron

Spin

1200

900

700

500

Prewash

Wash

Rinse

rinse hold

Drain

Spin

Filter

End

7. Start the programme

To start the selected programme, press the

“Start/Pause” button; the corresponding light stops

flashing.

The pilot light corresponding to the wash phase which is

running is on.

The machine starts operating.

8. At the end of the programme

The machine stops automatically. The light of the

“Start/Pause” button goes out, the “End” pilot light

illuminates and the door can be opened.

If the “Rinse Hold” option has been selected, the door

will be locked, the light of the “Start/Pause” button

goes off, the only “Rinse Hold” pilot light remains lit to

indicate that the water must be drained before opening

the door.

To empty out the water you can, after turning the

programme selector dial to “

o” position:

● select programme “Drain”, the water is emptied out

without spinning

● select programme

“

Spin”. Select the spin speed by

means of the relevant button and then press the

“Start/Pause” button. The water is emptied out and

the laundry is spun at the selected spin speed.

At the End of the cycle, and the

“

End” light illuminates.

The door can be opened.

Turn the programme selector dial to Reset “

o”.

Switch the machine off by pressing the “On/Off”

button.

Remove the laundry from the drum and carefully check

that the drum is empty so as to avoid any forgotten

items being damaged in a subsequent wash (e.g.

shrinking) or their colour running into a load of whites.

If you do not intEnd to carry out another wash, close the

water tap.

Leave the door open to prevent the formation of mildew

and unpleasant smells.

Start/

Pause

132967680.qxd 31/10/2007 14.40 Pagina 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Komentáře k této Příručce

Žádné komentáře

Prima LPR 712 Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Pračky Prima LPR 712